Can french doors swing both ways?

No — standard french doors are hinged to swing in one direction only, either inward or outward, depending on how the hardware is installed during the initial setup. True double-action (saloon-style) swing hardware exists but is uncommon in residential french door applications.

Most residential french doors use standard butt hinges or pivot hardware mounted to a fixed jamb, which locks in a single swing direction. Converting french doors to double-action swing requires specialty pivot hardware rated for bidirectional rotation — a different mechanical system entirely. WIN STELLAR's French pivot doors, for example, use a top-and-bottom pivot mount that swings in one configured direction, not bidirectionally. The swing direction is set at installation and isn't reversible without swapping the hardware.

• Standard residential french doors swing in one direction only — inward or outward — based on hinge or pivot hardware orientation.
• Double-action swing hardware (bidirectional) is a separate hardware category, not included in typical french door kits.
• WIN STELLAR French pivot doors use top-pin and bottom floor-plate pivot hardware, configured for single-direction swing at installation.
• Swing arc clearance for a french door panel equals approximately the full width of one panel — relevant for room-side floor space planning.
• Reversing swing direction on a hinge-hung french door requires remortising the jamb or replacing the frame; on pivot hardware, it requires repositioning the pivot plates.